Jagal Group is a leading Nigerian
conglomerate with operations in the Oil & Gas,
Construction, Manufacturing, FMCG and Technology industries.
The company has been growing successfully over the past 40
years, and has become a valuable and respected contributor to
the development of the country’s economy.
Jagal Group is a highly respected
member of the Nigerian business community and is consistently
amongst the leaders of its business sectors. The Company
possesses profound knowledge of the country’s social
complexities and the political, economic and corporate
systems, particularly those of the energy, real estate and
manufacturing sectors.The Jagal Group is a leading Nigerian
conglomerate with operations spanning three key sectors in
the
Nigerian Economy: Oil
& Gas, Construction & Real Estate Development, and FMCG
Manufacturing. The Group has been growing successfully over the
past 40 years and has become a valuable and respected contributor
to the development of Nigeria’s economy.
Position: Hydro-Test Engineer
Purpose
Prepare Hydo / Pneumatic Test Packs as required by the
project schedule;
Prepare for and perform Hydro / Pneumatic testing of
piping systems;
To maintain awareness of and ensure compliance with all
relevant Statutory and Company HSE Standards.
Key Skills
Safety;
Pipefitting;
Structural and Pipe Supports;
Jacket;
Topsides;
Supervision;
Construction;
Test Pack;
P&ID
Piping Isometric
ASME B31.3 and B31.8
Key Responsibilities
Coordinates with the Senior Hydro-Test Superintendent
and supervise the preparation of the test activity to ensure
all deficiencies are identified and punch lists are
prepared;
Identification of hydro and pneumatic test
limits;
Prepare marked up P&ID,S indicating test
limits;
Prepare marked up isometrics indicating test limits,
items to be removed, location of test blinds, plugs
etc.;
Ensure high point vents and low point drains are
available in the piping to be tested to avoid dead legs, air
pockets etc.;
Review the test and design pressures by isometric
and confirm with the line list;
Identify test equipment required for each test and
ensure availability;
Review test material availability, blinds, flanges,
plugs, gaskets etc. and raise purchase order to cover the
project piping scope;
Ensure all test equipment calibration is performed
and certification available;
Ensure availability of equipment consumables (Charts
etc.);
Review and comply with the Project
Hydro-test procedure;
Review and comply with the Project Flushing
procedure;
Ensure compliance to HSE Procedures;
Compile Test Packs in advance of test date for
submission and approval by client;
Interface with Nigerdock QA/QC Department for weld
clearance prior to test and with respect to all flushing,
testing and reinstatement activities;
Interface with the Piping Superintendent to
identify early opportunity to progress testing;
Perform pre-test line inspection to ensure compliance
to the test pack;
Along with the Piping Superintendent ensure all HSE
requirements are in place and followed prior to
pressurization;
Attend the test with QA/QC and client;
Ensure complete draining and drying of the piping
is performed after test;
Compile and update as required a register of test packs
by system and sub system;
Compile and update as required a Test Blind Register,
indicating the location of blinds fitted for test or
spectacle blinds turned;
Perform line inspection to ensure reinstatement of all
items removed for test and any test blinds are removed and
plugs seal welded if required;
Ensure the completed test sheet is signed by all
parties and added to the test pack;
Ensure the Sub System completion check sheets are
signed and returned to the Administrator;
Other Duties
Flushing, Drying and Reinstatement
Reports to
Construction Manager
Key Internal Interfaces
HSE
QA/QC
PMT Construction
Key External Interfaces
CPY Inspector
Must demonstrate a full knowledge of the safety
requirements associated with Hydro / Pneumatic
testing;
10 years experience in Field Piping work;
Special knowledge in Field Piping activities &
Hydro / Pneumatic test package preparation;
Good knowledge in Piping QC activities (NDT
etc.);
Fully conversant with P&ID,S, Piping Isometrics and
Sub System methodology;
Fluent in English.
Lagos – Lagos, LA NG (Primary)
How to Apply